Soda Blasting Aluminum Bodied ’73 Land Rover!

1973 Aluminum Bodied Series 3 Land Rover prior to soda blasting with the ACE Model 2-PS Heavy Duty Portable Soda Blaster – (Photos courtesy of Paul Spangler – Drummond Corporation- Middlefield, Ohio)

Hi Everybody! Happy 2016! Welcome to my blog about soda blasting, the environmentally friendly cleaning method that uses a form of baking soda (sodium bicarbonate) in place of other non-environmentally friendly, and health hazardous blasting medias like sand.

It’s a new year and I have a number of very cool and interesting projects to tell you about. I also owe some of you a response to questions you have asked. Please forgive me for not answering sooner, the last part of 2015 was extremely busy.

In my earlier postings, I explained what soda blasting is, what makes soda blasting such a unique cleaning process, some basic information on air compressors, on soda blasting equipment, and on a few popular applications. Once you understand how soda blasting works, it is much easier to appreciate why it is such an effective, safe, and eco-friendly cleaning method for many different types of jobs.

As I mentioned before, soda blasting has become a worldwide phenomenon! As I think back over the last several years, I am amazed at all of the different types of projects that I’ve been involved with, from helping do-it-yourself home owners, to assisting all kinds of businesses, large and small. I enjoy hearing from people, who have used soda blasting on their projects based on my recommendations. It is very satisfying to know that I’ve helped someone achieve completion of an important job.

Last year I posted a blog entitled “Soda Blasting A 60’s Muscle Car Classic!” That posting should tell you just about anything you need to know about soda blasting a steel bodied vehicle. Today, I want to tell you about an exciting project: the restoration of an aluminum bodied 1973 Land Rover Series 3! Yes, an aluminum body!

Last July, I was contacted by Paul Spangler of the Drummond Corporation about restoring the Land Rover, which he had recently purchased. Paul wanted to know if soda blasting would be able to strip his Rover without harming the aluminum body. I explained that I have been involved in a number of projects stripping aluminum aircraft and light gauge aluminum aircraft parts with no problems, and that I believed soda blasting would do a great job on his Land Rover. After our discussion, Paul decided to purchase an ACE Model 2-PS Heavy Duty Portable Soda Blaster to soda blast his prized aluminum Land Rover.

As you can see, the Land Rover had seen its share of adventures over the years! Since there were no major mechanical issues, Paul decided to drive and enjoy it over the summer before launching into the restoration.

Paul recently contacted me. His excitement and enthusiasm were very apparent. “I love the soda blaster! It has exceeded my expectations! Flawless unit! It is ridiculous how little media it used. The media usage is so well metered. Amazing!!!”

Paul used 6 – 50 lbs bags of Armex Flow XL soda blast media to completely strip the aluminum body. The job took around 5 hours. He used the standard 1/8” ID nozzle (requires a minimum of 18 CFM) and media restrictor, and blasted at 80 psi.

These pictures show just how beautiful the soda blasted aluminum looks.

Paul is now removing the body parts from the frame and will be soda blasting the bottom side of all body panels and the frame.

I’ll keep you posted on the progress of this interesting project as I get updates.

Hundreds of cars, trucks, boats, and other vehicles have been restored using soda blasting. Several years ago, Hot Rod magazine did a series of articles entitled “Paint & Bodywork, The Most Complete Step-By-Step Series Ever!” In the series, the Editor of Hot Rod had his personal 1969 Camaro stripped and refinished. They had the choice of any paint stripping method available. What method did they use on his personal car? Soda Blasting!

I hope this helps you out. In future postings, I’ll write about some of the other interesting projects that I’ve been involved with, using soda blasting. Soda blasting really is one of the most exciting, environmentally friendly cleaning processes available today. We are all put here on this planet for a short time, so let’s make the best of it and help preserve it for future generations.

Thanks for reading my blog! – The Soda Blasting Guy

Soda Blasting Swimming Pool Tile

Soda blasting swimming pool tile on Maui using the ACE Model 2-PS Heavy Duty Portable Soda Blaster – (Photos and video courtesy of Maui SodaBlast, LLC – Paia, Hawaii – owners John & Rina Andrade)

Hi Everybody! Happy Summer!  Welcome to my blog about soda blasting, the environmentally friendly cleaning method that uses a form of baking soda (sodium bicarbonate) in place of other non-environmentally friendly, and health hazardous blasting medias like sand.

In my earlier postings, I explained what soda blasting is, what makes soda blasting such a unique cleaning process, some basic information on air compressors, on soda blasting equipment, and on a few popular applications. Once you understand how soda blasting works, it is much easier to appreciate why it is such an effective, safe, and eco-friendly cleaning method for many different types of jobs.

As I mentioned before, soda blasting has become a worldwide phenomenon! As I think back over the last several years, I am amazed at all of the different types of projects that I’ve been involved with, from helping do-it-yourself home owners, to assisting all kinds of businesses, large and small. I enjoy hearing from people, who have used soda blasting on their projects based on my recommendations. It is very satisfying to know that I’ve helped someone achieve completion of an important job.

Summertime! Yea! Yesterday was the first day of summer and there is no better way to enjoy those hot summer days than by taking a refreshing dip in your swimming pool, or lounging around in your spa. One of the down sides of having your own pool or spa is cleaning the calcium build up that accumulates around the waterline. This unsightly build up tarnishes the beauty of the tile work around many pools and spas. Fortunately, there is an effective, environmentally friendly way to take care of the problem without harming the beauty of the tile. You guessed it….soda blasting!

Today, I want to tell you about a pool maintenance and repair business, which called me a while back, wanting to know if soda blasting could help them expand their business and help their profitability. John & Rina Andrade operate Maui SodaBlast in beautiful Paia, Hawaii. Hawaii is probably the most environmentally aware state in the USA. John & Rina insisted that they only wanted to use an eco-friendly, green cleaning process in their business. After discussing the benefits of soda blasting for their business, they decided to purchase the ACE Model 2-PS Heavy Duty Portable Soda Blaster.

As John wrote to me recently, “We own a Pool Maintenance & Repair business and I thought it would be good to offer a calcium (hard water line on the tile) removal service to our clients. It ended up being a great idea! Soda blasting has added about 20% to our bottom line, but that is a conservative number because we do not advertise, just recurring clients and a hand full of referrals.  Clients are very happy with the restoration of their pool tile and also love the idea the media is eco-friendly. Maui is a small island and word has gotten around quickly.”

As you can see, the transformations are striking! No more calcium buildup and beautifully clean tile and stone, with no damage.

BEFORE SODA BLASTING

AFTER SODA BLASTING

John soda blasts with a media specifically designed for pool cleaning and has “never had any problems with pitting or damaging glass or ceramic tile. The operator has to adjust the PSI depending how stubborn the water line (calcium).” John says that “keeping the nozzle at an angle works best. Also, I recommend keeping the nozzle moving, do not keep it in place too long. Reason being the grout line can be blown out if not careful and adjusting PSI as you go. Some calcium build ups are harder to remove than others, which is why the operator may have to increase the PSI.”

Click on the link below to see a short video of the actual process in action:

Soda blasting swimming pool tile – ACE Model 2-PS

Using the ACE Model 2-PS Heavy Duty Soda Blaster makes the job quick and efficient. John states that, “The actual time in the water soda blasting all depends on the size of the pool, multiple bodies of water, spill over and/or negative edge and trough. But for a basic pool at 15-20k gallons, I might use a bag and a half to two bags, but no more than three. I might be in the water max 2 hours; the hardest part of the job is setting up, breaking down, and cleaning up the media off of the pool deck.”

BEFORE SODA BLASTING

AFTER SODA BLASTING

If you have unsightly calcium build-up around your pool or spa, consider cleaning it the way it is being done in the environmentally conscious state of Hawaii. Whether you have a swimming pool cleaning business, a property management business, or a home pool, soda blasting is the way to restore the beauty of your pool, spa, fountain, or water feature.

I hope this helps you out. In future postings, I’ll write about some of the other interesting projects that I’ve been involved with, using soda blasting. Soda blasting really is one of the most exciting, environmentally friendly cleaning processes available today. We are all put here on this planet for a short time, so let’s make the best of it and help preserve it for future generations.

Thanks for reading my blog! – The Soda Blasting Guy

Soda Blasting A 60’s Muscle Car Classic!

(1968 Camaro SS – Owner Terry Tetzlaff – Paint by Painted Specialties of Muskegon, Michigan – Old paint job stripped off using the ACE Model 2-PS Heavy Duty Portable Soda Blaster)

Hi Everybody! Welcome to my blog about soda blasting, the environmentally friendly cleaning method that uses a form of baking soda (sodium bicarbonate) in place of other non-environmentally friendly, and health hazardous blasting medias like sand.

In my earlier postings, I explained what soda blasting is, what makes soda blasting such a unique cleaning process, some basic information on air compressors, on soda blasting equipment, and on a few popular applications. Once you understand how soda blasting works, it is much easier to appreciate why it is such an effective, safe, and eco-friendly cleaning method for many different types of jobs.

As I mentioned before, soda blasting has become a worldwide phenomenon! As I think back over the last several years, I am amazed at all of the different types of projects that I’ve been involved with, from helping do-it-yourself home owners, to assisting all kinds of businesses, large and small. I enjoy hearing from people, who have used soda blasting on their projects based on my recommendations. It is very satisfying to know that I’ve helped someone achieve completion of an important job.

In my last few blog postings, I have talked about stripping and refinishing furniture using soda blasting. Today, I’m going to switch gears and talk about another great soda blasting application: soda blasting and stripping automotive paint. I briefly talked about this in my posting of July 9, 2013 entitled “Soda Blasting & Stripping Automotive Paint”. Now I want to tell you about an actual example, which illustrates the kind of results you can achieve.

A few years ago, I was talking with Terry Tetzlaff, owner of Painted Specialties in Muskegon, Michigan. Terry is recognized as one of the top automotive painters in Michigan. He owns a 1968 Camaro SS, which was an old show car. The car was painted in a style common to show cars in the 1970’s and 80’s with multiple graphics and murals. Terry wanted to update the paint job and use the car as a rolling showcase for his painting business.

Terry was familiar with soda blasting, but had never actually done it before. As we talked, he became more enthusiastic about stripping his car by soda blasting it. As you can see in the picture, his Camaro had multiple graphics and murals, and multiple coats of clear lacquer to achieve that show car look. He had measured the paint thickness at 8-9 mils (Modern OEM finishes average about 3-5 mils). I told him that he would have no problem stripping his car using the ACE Model 2-PS Heavy Duty Portable Soda Blaster and a coarse grit soda blast media like Armex Flow XL. After considering other methods, Terry decided that soda blasting was the way to go.

The car was completely stripped one Saturday using the ACE Model 2-PS with a ¼” I.D. nozzle and 12- 50# bags of Armex Flow XL soda blast media. The blasting pressure was set at 90-100 psi. The amount of time and soda blast media needed to strip any given car will vary based on factors such as the condition of the paint, the type of paint, and the thickness of the paint, in addition to the size of the nozzle used and the blasting pressure.  Our experience has been that stripping the average car takes 8 to 12- 50# bags of soda blast media.

After soda blasting, the car was blown off with compressed air, taking extra care in areas like the inside of doors and other places where the soda dust could accumulate. The car was then washed with soap and water and thoroughly dried.

A self etching primer was applied over the bare metal to aid paint adhesion. A week later, the entire car was sanded with 320 grit sandpaper and primed with two part epoxy primer.

The next step involved wet sanding with 600 grit sandpaper. The entire car was inspected and Terry used 3M spot putty to fill in small imperfections and scratches. The spot putty and affected areas were sanded and reprimed as needed.

The car was taped off and sanded again with 2000 grit sandpaper. After that the entire car was wiped down with wax and grease remover, followed by a wipe down with a tack rag.

As experienced painters know, prep work is 90% of a great paint job. This is a lot of work, but it’s a good example of what you need to do to get a professional grade paint job.

With the prep work done, Terry applied 4 coats of Deltron Synergy Green (2010 Camaro color) and clear coated the car with several coats of DuPont clear. He then waited 2 weeks before beginning the wet sanding process, starting with 2000 grit by hand, and ending with 3000 grit before the buffing process.

As you can see, the final results are outstanding! Terry’s car gets a lot of attention where ever he takes it. The car has won multiple awards at various car shows throughout Michigan.

Hundreds of cars have been restored using soda blasting. Several years ago, Hot Rod magazine did a series of articles entitled “Paint & Bodywork, The Most Complete Step-By-Step Series Ever!” In the series, the Editor of Hot Rod had his personal 1969 Camaro stripped and refinished. They had the choice of any paint stripping method available. What method did they use on his personal car? Soda Blasting!

I hope this helps you out. In future postings, I’ll write about some of the other interesting projects that I’ve been involved with, using soda blasting. Soda blasting really is one of the most exciting, environmentally friendly cleaning processes available today. We are all put here on this planet for a short time, so let’s make the best of it and help preserve it for future generations.

Thanks for reading my blog! – The Soda Blasting Guy